| 是否进口：否 | 厂家(产地)：法国阿科码 | 牌号： 2850-07 |
| 销售方式：品牌经销 | 类型：标准料 | 加工级别：注塑级 |
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.77 - 1.80 g/cc | 1.77 - 1.80 g/cc | ASTM D792 |
| Density | 1.77 g/cc | 0.0639 lb/in? | ISO 1183 |
| Water Absorption | 0.030 % | 0.030 % | Dry; Sim. to ISO 62 |
| Viscosity | 1.60e+6 - 2.00e+6 cP @Shear Rate 100 1/s, Temperature 230 °C | 1.60e+6 - 2.00e+6 cP @Shear Rate 100 1/s, Temperature 446 °F | Melt; ASTM D3835 |
| Melt Flow | 9.0 - 16 g/10 min @Load 12.5 kg, Temperature 230 °C | 9.0 - 16 g/10 min @Load 27.6 lb, Temperature 446 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 70 - 75 | 70 - 75 | ASTM D2240 |
| Tensile Strength at Break | 27.6 - 48.3 MPa | 4000 - 7010 psi | ASTM D638 |
| Tensile Strength, Yield | 31.0 - 41.4 MPa | 4500 - 6000 psi | ASTM D638 |
| 40.0 MPa | 5800 psi | Dry; ISO 527-1/-2 | |
| Elongation at Break | >= 50 % | >= 50 % | Dry; ISO 527-1/-2 |
| 30 - 200 % | 30 - 200 % | ASTM D638 | |
| Elongation at Yield | 5.0 - 15 % | 5.0 - 15 % | ASTM D638 |
| 11 % | 11 % | Dry; ISO 527-1/-2 | |
| Tensile Modulus | 1.03 - 1.52 GPa | 149 - 220 ksi | ASTM D638 |
| 1.30 GPa | 189 ksi | Dry; ISO 527-1/-2 | |
| Flexural Strength | 20.7 - 34.5 MPa @Strain 5.00 % | 3000 - 5000 psi @Strain 5.00 % | ASTM D790 |
| Flexural Modulus | 1.03 - 1.24 GPa | 149 - 180 ksi | ASTM D790 |
| Compressive Strength | 41.4 - 58.6 MPa | 6000 - 8500 psi | ASTM D695 |
| Izod Impact, Notched | 1.60 - 4.27 J/cm | 3.00 - 8.00 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | NB | NB | ASTM D256 |
| Charpy Impact, Notched | NB @Temperature 23.0 °C | NB @Temperature 73.4 °F | Dry; ISO 179/1eA |
| Coefficient of Friction, Dynamic | 0.19 | 0.19 | vs. steel; ASTM D1894 |
| Coefficient of Friction, Static | 0.26 | 0.26 | vs. steel; ASTM D1894 |
| Taber Abrasion, mg/1000 Cycles | 6.0 - 9.0 | 6.0 - 9.0 | CS 17 1000g:pad; ASTM-G195-13A |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | 65% R.H; ASTM D257 |
| 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | Dry; IEC 60093 | |
| Dielectric Constant | 3.5 - 10.2 @Frequency 1000 Hz | 3.5 - 10.2 @Frequency 1000 Hz | ASTM D150 |
| 6.85 @Frequency 100 Hz | 6.85 @Frequency 100 Hz | Dry; IEC 60250 | |
| Dielectric Strength | 1.40 kV/mm | 35.6 kV/in | Dry; IEC 60243-1 |
| 1.30 - 1.60 kV/mm | 33.0 - 40.6 kV/in | ASTM D149 | |
| Dissipation Factor | 0.000012 @Frequency 100 Hz | 0.000012 @Frequency 100 Hz | Dry; IEC 60250 |
| 0.010 - 0.22 @Frequency 100000 Hz | 0.010 - 0.22 @Frequency 100000 Hz | ASTM D150 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 126 - 185 ?m/m-°C | 70.0 - 103 ?in/in-°F | ASTM D696 |
| Specific Heat Capacity | 0.745 - 0.958 J/g-°C | 0.178 - 0.229 BTU/lb-°F | DSC |
| Thermal Conductivity | 0.144 - 0.180 W/m-K | 0.999 - 1.25 BTU-in/hr-ft?-°F | ASTM D433 |
| Melting Point | 157 °C | 315 °F | 10°C/min; Dry; ISO 11357-1/-3 |
| 155 - 160 °C | 311 - 320 °F | ASTM D3418 | |
| Maximum Service Temperature, Air | 140 °C | 284 °F | UL RTI |
| Deflection Temperature at 0.46 MPa (66 psi) | 60.0 - 75.0 °C | 140 - 167 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 37.8 - 55.0 °C | 100 - 131 °F | ASTM D648 |
| Glass Transition Temp, Tg | -40.6 - -38.3 °C | -41.1 - -36.9 °F | ASTM D7028 |
| Decomposition Temperature | 375 °C | 707 °F | 1% wt. loss, TGA, in air |
| 410 °C | 770 °F | 1% wt. loss, TGA, in nitrogen | |
| UL RTI, Electrical | 140 °C | 284 °F | UL 746B |
| UL RTI, Mechanical without Impact | 140 °C | 284 °F | UL 746B |
| Flammability, UL94 | V-0 @Thickness 0.800 mm | V-0 @Thickness 0.0315 in | IEC 60695-11-10 |
| V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | Yellow Card Available; Dry; IEC 60695-11-10 | |
| Oxygen Index | 43 % | 43 % | ASTM D2863 |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.42 | 1.42 | sodium D line; ASTM D542 |
| Descriptive Properties | |||
| Moisture Sensitive | No |
本公司长期销售法国阿科玛 PVDF EBA EVA EEA EAA PA11 PA12 PMMAEMA料多种牌号
我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、竭诚为您服务！
